Cookie Img
Call : +918061882003
Home » Products » Smps Battery Chargers » 48V/ 12amp SMPS E Rickshaw Battery Charger

48V/ 12amp SMPS E Rickshaw Battery Charger

48V/ 12amp SMPS E Rickshaw Battery Charger
48V/ 12amp SMPS E Rickshaw Battery Charger
Send Inquiry
Product Code : 18
Brand Name : Siyachi
Price And Quantity
  • Minimum Order Quantity
  • 1
  • Unit of Measure
  • Piece/Pieces
  • Price Range
  • Price
  • 4560 INR
Product Specifications
  • Usage
  • Other
  • Voltage
  • 12 Ampere (amp)
  • Weight
  • 4 Kilograms (kg)
  • Warranty
  • 6month
Product Description

e-RICKSHAW Battery Charger

Smart Charger Helps Prevent Sulfation and Excessive Gassing

How a lead acid battery is charged can greatly improve battery performance and life span. To support this, battery charging technology has evolved with smart chargers.

Multi stage smart charging technology automatically controls between under charging and over charging and significantly reduce the negative impact of these conditions.

Correct application of the charging stages will maintain the battery at full charge, balancing between undercharging and overcharging, and helps prevent sulfation and excessive gassing.

Multi stage is the safest and most effective method of charging eRickshaw batteries. The electrolyte solution has phases of accepting full charge. Multi state charging accommodates those phases and helps prevent sulfation and excessive gassing.

Constant current provides the charge. The bulk stage charges battery to about 80% of the recharge and the charge current is held constant and the voltage increases. The charger will give the battery as much current as it will accept and not raise a wet battery over 55°C.

ABSORPTION - The voltage is held constant for a controlled period so that the electrolyte solution absorbs the charge fully and completely. The most important part of the charge cycle is the equalization charge. Bulk charging only reaches the battery bank to 80% level, the absorption charge completes the charging cycle.

OPTIMIZATION - A low charge is delivered to maintain the battery at full charge while not overcharging. In this stage the charger voltage is held constant while the current is reduced to less than 5% of the battery capacity.

EQUALIZATION is essentially a controlled over charge. The peak voltage the charger attains at the end of the bulk Mode is equalization voltage. The electrolyte in a wet battery can stratify over time, if not cycled occasionally.

In equalization,
the voltage is brought up above typical peak charging voltage well into the gassing stage, and held for a fixed (but limited) period. This stirs up the chemistry in the entire battery, equalizing the strength of the electrolyte and knocking of any loose sulfation that maybe on the battery plates.


Trade Information
  • Delivery Time
  • 1 Days
  • Main Domestic Market
  • All India


Back to top
SAMCO RUBBER & BATTERIES All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.